欧美精品videos极品,污污视频网站免费观看,www.射射射

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-672-NGF	700×800×1200	1030×1580×2150

light source drive	EPS
Effective irradiance area	800mm×700mm
Distance of light source from test surface	1000±200mm
Light source power	2000W/lamp
Number of light sources	1PCS
Light intensity range	150～250W/m2
spectral range	280～320nm 320～400nm
UVB/(UVA+UVB)	5 to 8%
inhomogeneity	≤10%
UVC Content	（Ratio of integrated irradiance in the wavelength range (250-280) nm to integrated irradiance in the wavelength range (250-400) nm of UVC content ≤1%.
Sample temperature range	60～70℃ (customized water-cooled structure for cell carrier table)
Sample temperature deviation	≤±2℃
Chamber temperature range	20～80℃
Box temperature fluctuation	≤1℃
Outer case material	1.2mm Cold rolled steel plate with plastic spraying on both sides
Inner box material	1.0mm thick SUS304 stainless steel, sunlight simulating fully reflective reflective film mounted on the side wall for secondary sealing and optical reflection control.
Insulation material	10mm Thickness High Quality Insulation Material
Controller	Siemens PLC Module + Touch Screen
Cooling method	Air-cooled refrigeration
Compressor	Taikang, France
Heating method	Nickel-chromium alloy electric wire type heater
light source	Holler lamp, metal halide wick, European brand. Warranty time of the light source 2000 hours, the actual use of time greater than or equal to 3000 hours
irradiance meter	Alberdi Brands
security protection	Emergency stop button, sample surface temperature is too high, light source system fault alarm, power supply phase/undervoltage/overvoltage/leakage protection, fan overload, compressor overvoltage/overheat/overcurrent, heating wire over-temperature protection
Supply Voltage	Voltage: 3/N/PE AC 400V±10% 50Hz Rated current: 30A
Power	20.0kW
operating environment	10℃～＋35℃ ? ?? ≤75% RH
Note: 1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions 2、Can be customized according to the specific requirements of the user non-standard uv aging simulation test chamber etc 3、This technical information is subject to change without prior notice.

Industry News

Cold and heat shock test chamber operation you understand?

Cold and thermal shock test chamber on the market is divided into two categories, a two-compartment type, including high-temperature region and low-temperature region, the test object were in two different temperatures in the area of the test, hot and cold alternating test; the other is a three-compartment type, in addition to high-temperature and low-temperature areas, there is also a test area, and the two-compartment different is that the three-compartment does not need to be directly in the test area for the test, only need to be through the air compression method

Standardized Operating Instruction for Constant Temperature and Humidity Test Chambers (Applicable to R&D, Quality Inspection, and Third-Party Laboratories)

To ensure the electrical, mechanical and thermodynamic integrity of constant temperature and humidity test chambers (hereafter “the chamber”), to standardize operating procedures, and to reduce failure and accident rates, this instruction is established. It applies to all programmable, single-point and walk-in chambers that are newly purchased, in service or relocated.

FAQ on Rain Test Chambers

Many people still have questions about rain test chambers. Today, we’ll address a few of them.

91欧美视频在线_国产精品看片资源_yy6080午夜_7777精品视频_日本三级2019_鲁丝一区鲁丝二区鲁丝三区_精品免费久久久_成人av在线不卡_精品日韩av一区二区_蜜臀av午夜一区二区三区

UV Aging Simulation Test Chamber