Service Hotline
4000-662-888| Model | Studio Size? (D*W*H)mm | Dimension（D*W*H）mm | |
| LRHS-101C-LJS | 450×450×500 | 1160×1000×1610 | |
| LRHS-225C-LJS | 500×600×750 | 1210×1150×1870 | |
| LRHS-504C-LJS | 700×800×900 | 1260×1340×2070 | |
| LRHS-800C-LJS | 800×1000×1000 | 1370×1550×2170 | |
| LRHS-1000C-LJS | 1000×1000×1000 | 1560×1550×2170 | |
| temperature range | A：-20℃～150℃ ? ? ?B：-40℃～150℃ C：-60℃～150℃ ? ? ?D：-70℃～150℃ |
||||||
| Temperature uniformity | ≤2℃ (at no load) | ||||||
| Temperature fluctuation | ±0.5℃ (at no load) | ||||||
| Time Setting Range | 1～60000M | ||||||
| Humidity range | 20%～98% RH | ||||||
| Humidity uniformity | +2% -3% RH | ||||||
| Humidity fluctuation | ±2% | ||||||
| heating speed | 1.0～3.0℃/min | ||||||
| cooling rate | 0.7～1.0℃/min | ||||||
| test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| viewing window | 210 x 275mm or 395 x 395mm (effective field of view) | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + fiberglass | ||||||
| Temperature Controller | Imported “UEC” brand temperature and humidity meter | ||||||
| temperature sensor | PT100 platinum resistance temperature measurement body | ||||||
| Cooling method | Single or double cascade refrigeration | ||||||
| Compressor | Taikang, France | ||||||
| standard configuration | Wet bulb gauze, sample holder | ||||||
| security protection | Compressor overpressure overload, fan motor overheating, leakage protection Over-temperature, under-phase/reverse-phase, test timing, overload and short-circuit protection |
||||||
| Supply Voltage | AC380V±10% 50Hz | ||||||
| Power consumption | （A）3.5kW/4.0kW/6.0kW/8.0kW/9.0kW （B）4.0kW/4.5kW/7.5kW/9.0kW/10.5kW （C）4.5kW/6.5kW/9.0kW/13.0kW/13.0kW |
||||||
| operating environment | 5℃～＋28℃ ≤85% RH | ||||||
| Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard motor test chamber etc 3、This technical information, subject to change without notice |
|||||||
Copyright ? 2025 Shanghai Linpin Instrument Co., Ltd Copyright
| ICP Number：Shanghai ICP Record No. 12029585-7
| Sitemap
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
