Service Hotline
4000-662-888| Model | Studio Size? (D*W*H)mm | Dimension（D*W*H）mm | |
| LRHS-108-RFHY | 450×600×400 | Subject to contractual three-view | |
| LRHS-270-RFHY | 600×900×500 | ||
| LRHS-412-RFHY | 750×1100×500 | ||
| LRHS-663-RFHY | 850×1300×600 | ||
| LRHS-816-RFHY | 850×1300×600 | ||
| LRHS-1080-RFHY | 900×2000×600 | ||
| temperature range | RT+5℃～60℃ | |
| Humidity range | 30%～98% RH | |
| Saturated drum temperature | RT+10℃～70℃ | |
| Temperature uniformity | ≤2℃ (at no load) | |
| Temperature fluctuation | ±0.5℃ (at no load) | |
| Salt spray deposition | 1～2ml/80 cm2.h(16-hour average) | |
| heating rate | 0.5℃～1.5℃/min | |
| cooling rate | 0.5℃～1.0℃/min | |
| Compressed air pressure | 2.00±0.01（kg/cm2） | |
| Spraying method | Continuous/periodic selectable | |
| Specimen holder angle | 20±5° | |
| Test Methods | NSS test AASS test CASS test | |
| Case Material | PP reinforced rigid plastic sheet or 316 stainless steel | |
| Lid Material | PP reinforced rigid plastic sheet or 316 stainless steel | |
| Air-saturated drums | Imported high-grade stainless steel SUS304 | |
| Pressurized Air Hose Material | High quality rubber hose | |
| Other pipelines | Thickened Fluorosilicone Rubber Tubing | |
| Temperature Controller | Imported “UEC” brand temperature and humidity meter | |
| Dehumidification and cooling | Single or double cascade refrigeration | |
| temperature sensor | PT100 platinum resistance temperature measurement body | |
| Compressor | Taikang, France | |
| heater | Titanium Heating Tube | |
| interrupter | Schneider miniature circuit breakers (to prevent short circuits in control circuits) | |
| standard configuration | V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes | |
| security protection | Over-temperature, overall equipment under-phase/reverse-phase, test timing, rapid fogging instructions The end of the test, low water level protection, leakage, short circuit, compressor overpressure overload |
|
| Supply Voltage | AC380V±10% 50Hz | |
| Power consumption | 8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW | |
| operating environment | 5℃～＋28℃ ≤85% RH | |
| Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard salt spray box for automotive parts etc 3、This technical information, subject to change without notice |
||
Copyright ? 2025 Shanghai Linpin Instrument Co., Ltd Copyright
| ICP Number：Shanghai ICP Record No. 12029585-7
| Sitemap
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
室.png)
箱.png)
箱.png)
